Alex Hansen Posted April 2, 2021 Share Posted April 2, 2021 (edited) I have just updated to version 1.2.0 and I don't know if this is the reason, but suddenly Custemers login don't work anymore. Even with new password it will not accept any login at all, not even my own testuser (has always be worked). When entering wrong password I get the message: Invalid password. When entering right password I get the meesage: Approval failed. Any idea how to fix this issue? The site: www.sportspower.dk Edited April 2, 2021 by Alex Hansen Link to comment Share on other sites More sharing options...
datakick Posted April 2, 2021 Share Posted April 2, 2021 "Approval failed" is not thrown by thirtybees core. Maybe some module/override? Link to comment Share on other sites More sharing options...
Alex Hansen Posted April 2, 2021 Author Share Posted April 2, 2021 20 minutes ago, datakick said: "Approval failed" is not thrown by thirtybees core. Maybe some module/override? Any suggestions on how to fix this? Link to comment Share on other sites More sharing options...
Kashir2000 Posted April 3, 2021 Share Posted April 3, 2021 @Alex Hansen Tried to disable 3rd party modules? There is an option in Performance preferences, to disable them. Then check if works. If it works, then one one third party modules is doing something wrong. Link to comment Share on other sites More sharing options...
the.rampage.rado Posted April 3, 2021 Share Posted April 3, 2021 I have updated to bleeding edge - everything works fine Link to comment Share on other sites More sharing options...
toplakd Posted April 3, 2021 Share Posted April 3, 2021 (edited) As Datakick and Kashir said: Go to "Advanced Parameters / Performance" and set as on picture: I'm always using Bleeding edge ever since this option was introduced in Core Updater and don't have any issues. I mostly update within couple of hours after I notice there was update on github. Currently running "Bleeding Edge - Main" Edited April 3, 2021 by toplakd Link to comment Share on other sites More sharing options...
Alex Hansen Posted April 3, 2021 Author Share Posted April 3, 2021 2 hours ago, toplakd said: As Datakick and Kashir said: Go to "Advanced Parameters / Performance" and set as on picture: I'm always using Bleeding edge ever since this option was introduced in Core Updater and don't have any issues. I mostly update within couple of hours after I notice there was update on github. Currently running "Bleeding Edge - Main" Well ... Thank you for your suggestions, but it didn't help me. Still can't login as a customer. I think I will contact Datakick for paid support, as I can't solve this my own. I'm not sure if is the update itself who has made the error, just saying that I (and my custemers) have these problem after the update. Link to comment Share on other sites More sharing options...
Alex Hansen Posted April 3, 2021 Author Share Posted April 3, 2021 2 hours ago, Kashir2000 said: @Alex Hansen Tried to disable 3rd party modules? There is an option in Performance preferences, to disable them. Then check if works. If it works, then one one third party modules is doing something wrong. It didn't help 😞 Thank for for suggestion. Link to comment Share on other sites More sharing options...
Alex Hansen Posted April 3, 2021 Author Share Posted April 3, 2021 I don't think its the update who has created the problem, because I just tried to go back to old versions without any luck. Now I have update to 1.3.0-main and still have the same problem. Maybe something has been overwrittten like an htaccess (can see in FTP that this is updated)? Link to comment Share on other sites More sharing options...
datakick Posted April 3, 2021 Share Posted April 3, 2021 did you try to create a new customer account and log out/log in back? Does it work or not? Link to comment Share on other sites More sharing options...
Kashir2000 Posted April 3, 2021 Share Posted April 3, 2021 Ok. So to debug this, please follow instructions: Download your shop onto hardDrive (direcotries: modules, classes, controllers, overrides mainly). Do not download pictures. Perform a test search for message "Approval failed" and locate which file is emitting this error. Come back, and report. Just a guess, but this may be some 3rd party module or modification integrated as override etc. Maybe some kind of CAPTCHA? Some modules can modify core controllers and classes by preg replaces. Link to comment Share on other sites More sharing options...
musicmaster Posted April 4, 2021 Share Posted April 4, 2021 I had a look at it. I created an account; logged out and tried to login again. I couldn't login again but I always got the same error - no matter whether the password was right or not. My gut feeling is that it could have something to do with groups. Link to comment Share on other sites More sharing options...
Alex Hansen Posted April 4, 2021 Author Share Posted April 4, 2021 23 hours ago, datakick said: did you try to create a new customer account and log out/log in back? Does it work or not? Hi Datakick I have tried this, but it don't work 😞 Link to comment Share on other sites More sharing options...
Alex Hansen Posted April 4, 2021 Author Share Posted April 4, 2021 2 hours ago, musicmaster said: I had a look at it. I created an account; logged out and tried to login again. I couldn't login again but I always got the same error - no matter whether the password was right or not. My gut feeling is that it could have something to do with groups. Thanks for trying, but I experience the same thing 😞 Link to comment Share on other sites More sharing options...
haylau Posted April 4, 2021 Share Posted April 4, 2021 5 hours ago, Alex Hansen said: Thanks for trying, but I experience the same thing 😞 Do you use the knowband OPC? Have you asked them if it is is compatible with TB .2? Link to comment Share on other sites More sharing options...
SLiCK_303 Posted April 4, 2021 Share Posted April 4, 2021 If ALL you did was update to 1.2.0 and THEN it stopped working....If thats all that you did, and it worked before... I would have simply restored my files via the core updaters backup files. If you look in your admin folder there are backups from when you used the updater, like CoreUpdaterBackup-(date). I would have just copied those files over your present setup. As you have used the core updater since the update to 1.2.0, it makes it a little more complicated probably. Have you tried to delete cache files, both theme and system, manually? Link to comment Share on other sites More sharing options...
Alex Hansen Posted April 6, 2021 Author Share Posted April 6, 2021 On 4/4/2021 at 9:26 PM, SLiCK_303 said: If ALL you did was update to 1.2.0 and THEN it stopped working....If thats all that you did, and it worked before... I would have simply restored my files via the core updaters backup files. If you look in your admin folder there are backups from when you used the updater, like CoreUpdaterBackup-(date). I would have just copied those files over your present setup. As you have used the core updater since the update to 1.2.0, it makes it a little more complicated probably. Have you tried to delete cache files, both theme and system, manually? As mentioned earlier, I am absolutely NOT sure that it is the update itself that is the reason why my customer login no longer works. It's just after the update that I have been made aware that it no longer works. I have a test account, which I myself have used by March 4 without any problems, so at that time it worked without any problems. I do not remember making any other changes since then, which is why I initially thought it was the update that was causing the problem. Now I suspect more closely the theme I use (IQIT warehouse). Maybe even a combination of the update and the theme. Link to comment Share on other sites More sharing options...
colorful-ant Posted April 19, 2021 Share Posted April 19, 2021 (edited) I had the same problem for 2 days now. Now it occurred to me that it wasn't the first time. i mainly use firefox. simply deleting the cache in the shop and in the browser is not enough. firefox -> settings -> cookies and website data -> manage data -> select website and then remove it, after that it worked for me that I was able to log in with my test account / customer account. now it works for me again with logging in as a customer. chrome browser, no problem on my store. -> i think firefox!!!! Edited April 19, 2021 by colorful-ant Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now